which direction should the furnace filter face

Air filters have arrows printed on them that indicate which direction they should be installed. How can you ensure your filter faces the right way.

Furnace Filter Maintenance Planitdiy

On the new filter find the arrow indicating the proper airflow direction.

. The arrows should always point away from the supply air and toward the blower. The arrow should ALWAYS point towards the return. All air filters have some arrows printed on their sides that make it clear which way they should be installed.

If the filter is in the wall or ceiling then the mesh should face the inside of the wall or ceiling. Heres a rule of thumb. In general if your filter is on the ceiling the arrow should face the.

That arrow must always face toward the furnace and away from the return duct that carries the air in. Now that you are familiar with the correct way a furnace filter should be installed check our large. If the air is flowing to the right the air should point to the right.

The arrow must face toward the furnace and away from the return duct that. The air filters metal mesh should face the blower in the HVAC unit. The arrow should face towards your furnace and away from the air duct that supplies your unit with air.

The pleated part of the filter should be facing you. Which way should furnace filter face. The arrows on the filter should point toward the furnace to have those arrows pointing the direction of the airflow through the ducts and into the furnace.

This direction is from the supply ducts towards the blower. The arrows on your furnace filter should always point in the same direction as the airflow. These arrows show the direction in which air flows through your HVAC system.

If you are looking at a furnace filter find the arrow that indicates the proper air flow direction. It may also be designed to flow air better in one direction. If youre confused about which direction to install your filter please feel free to give us a call at Jerry Kelly Heating Air Conditioning.

Heres an easy way to figure out which way the air flow arrow goes. The air filter arrows should always face your unit. Be very careful when analyzing the markings so that you dont make a mistake during the installation.

A furnace filter has one side that allows it to breath fresh air through while the other side traps dust and particles from the air. If you can feel or see a density difference between sides the least dense side should face out If the filter is not labeled it should install in either direction as there is likely no difference from one side to the other. To make things easier.

Then slide the filter back into place and replace any cover that goes over it. Bear in mind the arrow must always face toward the furnace and away from the return duct.

What Is The Correct Furnace Filter Direction How To Replace Furnace Filter Furnace And Air Conditioner Repair In Olathe Overland Park Lenexa Shawnee And Gardner